# Copper Developer Portal

- [Introduction](https://developer.copper.co/guides/introduction.md)
- [Fetch balances](https://developer.copper.co/guides/fetch-balances-and-transactions/fetch-balances.md): When you perform a request without specifying any additional filters like `portfolioId` or `currency`, the method returns all wallets which have non-zero balances only.
- [Fetch transfers](https://developer.copper.co/guides/fetch-balances-and-transactions/fetch-transfers.md)
- [Fetch orders](https://developer.copper.co/guides/fetch-balances-and-transactions/fetch-orders.md)
- [Fetch updated transfer or orders](https://developer.copper.co/guides/fetch-balances-and-transactions/fetch-updated-orders.md)
- [Move funds between portfolios](https://developer.copper.co/guides/funds-transfers/move-funds-between-portfolios.md)
- [Withdraw to an Address Book address](https://developer.copper.co/guides/funds-transfers/withdraw-to-address-book.md)
- [Move funds between exchange subaccounts](https://developer.copper.co/guides/funds-transfers/move-funds-between-subaccount.md)
- [Move funds between exchanges](https://developer.copper.co/guides/funds-transfers/move-funds-between-exchanges.md)
- [Chain of withdrawals](https://developer.copper.co/guides/funds-transfers/chain-of-withdrawals.md)
- [Approve (co-sign) an order](https://developer.copper.co/guides/funds-transfers/approve-transfer-order.md)
- [Enter the master password for an order](https://developer.copper.co/guides/funds-transfers/enter-master-password-order.md)
- [Sign order](https://developer.copper.co/guides/funds-transfers/sign-order.md): Start crypto signing for an order
- [Cancel order](https://developer.copper.co/guides/funds-transfers/cancel-order.md)
- [Introduction](https://developer.copper.co/guides/copper-network/introduction.md)
- [Retrieve Network participants](https://developer.copper.co/guides/copper-network/settlements/retrieve-network-participants.md): Find participant of the Copper Network
- [Find supported currencies](https://developer.copper.co/guides/copper-network/settlements/find-supported-currencies.md)
- [Create a settlement order](https://developer.copper.co/guides/copper-network/settlements/create-settlement-order.md)
- [Accept a settlement order](https://developer.copper.co/guides/copper-network/settlements/accept-settle-order.md): Accept counterparty settlement order
- [Cancel a settlement order](https://developer.copper.co/guides/copper-network/settlements/cancel-settle-order.md)
- [Sign a settlement order](https://developer.copper.co/guides/copper-network/settlements/sign-settle-order.md): Start crypto signing for an order
- [Retrieve Network participants](https://developer.copper.co/guides/copper-network/transfers/retrieve-network-participants.md): Find participant of the Copper Network
- [Create transfer](https://developer.copper.co/guides/copper-network/transfers/create-transfer-order.md)
- [Approve transfer](https://developer.copper.co/guides/copper-network/transfers/approve-transfer-order.md)
- [Introduction](https://developer.copper.co/guides/clearloop/introduction.md)
- [Connect Exchange Account](https://developer.copper.co/guides/clearloop/binding.md)
- [Delegate (lock) and transfer funds](https://developer.copper.co/guides/clearloop/delegate-funds.md)
- [Undelegate (unlock) funds](https://developer.copper.co/guides/clearloop/undelegate-funds.md)
- [Fetch delegated balances](https://developer.copper.co/guides/clearloop/fetch-delegated-balances.md)
- [ClearLoop Settlements](https://developer.copper.co/guides/clearloop/settlements.md)
- [Trading on Hyperliquid](https://developer.copper.co/guides/blockchains/hyperliquid.md)
- [How to launch](https://developer.copper.co/guides/copper-unlimited-online/how-to-launch.md)
- [Create a withdrawal order](https://developer.copper.co/guides/copper-unlimited-online/create-withdraw-order.md)
- [Start signing](https://developer.copper.co/guides/copper-unlimited-online/start-signing-flow.md): Start crypto signing for an order
- [Sign transaction](https://developer.copper.co/guides/copper-unlimited-online/sign-transaction.md)
- [Get Copper Unlimited Transaction](https://developer.copper.co/guides/copper-unlimited-online/get-cu-transaction.md)
- [Enabling SSL/TLS](https://developer.copper.co/guides/copper-unlimited-online/enabling-ssl-tls.md)
- [Example of the service](https://developer.copper.co/guides/copper-unlimited-online/example-of-the-service.md)
- [What are Fees Vaults](https://developer.copper.co/guides/fees-vaults/introduction.md)
- [How to launch](https://developer.copper.co/guides/fees-vaults/how-to-launch.md)
- [Create a smart-call order](https://developer.copper.co/guides/defi/create-smart-call-order.md)
- [Create a multi-smart-call order](https://developer.copper.co/guides/defi/create-multi-smart-call-order.md)
- [Get staking reward orders](https://developer.copper.co/guides/staking/get-staking-reward-orders.md)
- [Create staking order](https://developer.copper.co/guides/staking/create-staking-order.md)
- [Get active stakes](https://developer.copper.co/guides/staking/get-active-stakes.md)
- [Get pending stakes](https://developer.copper.co/guides/staking/get-pending-stakes.md)
- [Get outstanding stakes](https://developer.copper.co/guides/staking/get-outstanding-stakes.md)
- [Introduction](https://developer.copper.co/guides/webhooks/introduction.md)
- [How to set up](https://developer.copper.co/guides/webhooks/how-to-setup.md)
- [Validate signature](https://developer.copper.co/guides/webhooks/validate-signature.md)
- [Webhook events](https://developer.copper.co/guides/webhooks/webhook-event.md)
- [Support](https://developer.copper.co/guides/support.md)
- [Getting started](https://developer.copper.co/api-reference/getting-started.md)
- [Authentication](https://developer.copper.co/api-reference/authentication.md)
- [Service accounts](https://developer.copper.co/api-reference/service-accounts.md)
- [Create an API key](https://developer.copper.co/api-reference/create-api-key.md)
- [Rate limits](https://developer.copper.co/api-reference/rate-limits.md)
- [Errors](https://developer.copper.co/api-reference/errors.md)
- [Try it out](https://developer.copper.co/api-reference/try-it-out.md)
- [Get agent wallets](https://developer.copper.co/api-reference/hyperliquid/get-agent-wallets.md): Get the active Hyperliquid agent (hot) wallets for a portfolio, or for every portfolio in an organization
- [Execute exchange action](https://developer.copper.co/api-reference/hyperliquid/execute-exchange-action.md): Execute Hyperliquid exchange action. Mimics https://hyperliquid.gitbook.io/hyperliquid-docs/for-developers/api/exchange-endpoint
- [Get allowed markets](https://developer.copper.co/api-reference/hyperliquid/get-allowed-markets.md): Get the list of allowed Hyperliquid markets
- [Validate Address](https://developer.copper.co/api-reference/blockchain/validate-address.md)
- [Get ClearLoop Actions](https://developer.copper.co/api-reference/clearloop/get-clearloop-actions.md)
- [Get ClearLoop Action by ID](https://developer.copper.co/api-reference/clearloop/get-clearloop-action-by-id.md)
- [Get ClearLoop Balances](https://developer.copper.co/api-reference/clearloop/get-clearloop-balances.md)
- [Get ClearLoop Exchanges](https://developer.copper.co/api-reference/clearloop/get-clearloop-exchanges.md)
- [Get ClearLoop Exchange by ID](https://developer.copper.co/api-reference/clearloop/get-clearloop-exchange-by-id.md)
- [Get ClearLoop Portfolios](https://developer.copper.co/api-reference/clearloop/get-clearloop-portfolios.md)
- [Get ClearLoop Portfolio by Id](https://developer.copper.co/api-reference/clearloop/get-clearloop-portfolio-by-id.md)
- [Get ClearLoop Settlements](https://developer.copper.co/api-reference/clearloop/get-clearloop-settlements.md)
- [Get ClearLoop Settlement by ID](https://developer.copper.co/api-reference/clearloop/get-clearloop-settlement-by-id.md)
- [Get Crypto Addresses](https://developer.copper.co/api-reference/address-book/get-crypto-addresses.md): Retrieve information about crypto addresses in an organization's address book
- [Create Crypto Address](https://developer.copper.co/api-reference/address-book/create-crypto-address.md): Create a new crypto address in an organization's address book
- [Get Crypto Address by ID](https://developer.copper.co/api-reference/address-book/get-crypto-address-by-id.md): Retrieve information about a crypto address in an organization's address book
- [Deactivate Crypto Address](https://developer.copper.co/api-reference/address-book/deactivate-crypto-address.md): Deactivate a crypto address in an organization's address book
- [Get Currencies](https://developer.copper.co/api-reference/currencies/get-currencies.md)
- [Get Currency](https://developer.copper.co/api-reference/currencies/get-currency.md)
- [Currency Trading Fees for Amount](https://developer.copper.co/api-reference/currencies/currency-trading-fees-for-amount.md): Calculates trading fees for a given amount and a currency pair
- [Get Deposit Targets](https://developer.copper.co/api-reference/deposit-targets/get-deposit-targets.md): Retrieve information about all deposit targets in an organization
- [Create Deposit Target](https://developer.copper.co/api-reference/deposit-targets/create-deposit-target.md): Create a new deposit target
- [Activate Deposit Target Currency](https://developer.copper.co/api-reference/deposit-targets/activate-deposit-target-currency.md): Update deposit target
- [Dry Run Order](https://developer.copper.co/api-reference/orders/dry-run-order.md)
- [Get Orders](https://developer.copper.co/api-reference/orders/get-orders.md)
- [Create Order](https://developer.copper.co/api-reference/orders/create-order.md)
- [Create Multiple Orders](https://developer.copper.co/api-reference/orders/create-multiple-orders.md): Bulk orders creation. If the execution of an order fails, it will not affect the execution of other orders. Failed orders will be returned in the response. The bulk size should be less than 50 orders.
- [Accept Order](https://developer.copper.co/api-reference/orders/accept-order.md): Accept counterparty settlement order
- [Cancel Order](https://developer.copper.co/api-reference/orders/cancel-order.md)
- [Approve (co-sign) Order](https://developer.copper.co/api-reference/orders/approve-co-sign-order.md)
- [Get Order by ID](https://developer.copper.co/api-reference/orders/get-order-by-id.md)
- [Provide master password for Order](https://developer.copper.co/api-reference/orders/provide-master-password-for-order.md)
- [Start Signing](https://developer.copper.co/api-reference/orders/start-signing.md): Start crypto signing for an order
- [Download Files](https://developer.copper.co/api-reference/files/download-files.md)
- [Get Organizations](https://developer.copper.co/api-reference/organizations/get-organizations.md): Retrieve information about organizations
- [Get Activities](https://developer.copper.co/api-reference/organizations/get-activities.md): Retrieve information about all activities in the organization
- [Get Organization Members](https://developer.copper.co/api-reference/organizations/get-organization-members.md): Retrieve information about organization members
- [Get Counterparties](https://developer.copper.co/api-reference/network/get-counterparties.md): Find participant of the Copper Network
- [Get Loans](https://developer.copper.co/api-reference/lending/get-loans.md): Retrieve loans
- [Create Loan](https://developer.copper.co/api-reference/lending/create-loan.md): Initiate loan creation. This action can only be carried out by the lender.
- [Calculate Loan LTV Dry Run](https://developer.copper.co/api-reference/lending/calculate-loan-ltv-dry-run.md): Obtain the loan LTV or needed collateral amount for given loan parameters.
- [Accept Loan Term Extension](https://developer.copper.co/api-reference/lending/accept-loan-term-extension.md): Accept the loan term extension request. Only requests that were initiated by the counterparty can be accepted.
- [Accept Loan Interest Payment](https://developer.copper.co/api-reference/lending/accept-loan-interest-payment.md): Accept the loan interest payment request.
- [Accept Loan](https://developer.copper.co/api-reference/lending/accept-loan.md): Accept a loan. This action can only be carried out by the borrower.
- [Accept Loan Rebalance](https://developer.copper.co/api-reference/lending/accept-loan-rebalance.md): Accept the loan rebalance request. Only a lender can carry out this action.
- [Accept Loan Repayment](https://developer.copper.co/api-reference/lending/accept-loan-repayment.md): Accept the full or partial loan repayment request. Only requests that were initiated by the counterparty can be accepted.
- [Accept Loan Rerate](https://developer.copper.co/api-reference/lending/accept-loan-rerate.md): Accept the loan interest rerate request. Only the borrower can carry out this action.
- [Accept Loan Top Up](https://developer.copper.co/api-reference/lending/accept-loan-top-up.md): Accept the loan top up request. Only a borrower can carry out this action.
- [Approve Loan](https://developer.copper.co/api-reference/lending/approve-loan.md): Approve a loan. This action can only be carried out by the lender if a loan is in awaiting-approval state.
- [Cancel Loan Default](https://developer.copper.co/api-reference/lending/cancel-loan-default.md): Cancel a default request for loan. This action can only be carried out by the lender.
- [Cancel Loan Term Extension](https://developer.copper.co/api-reference/lending/cancel-loan-term-extension.md): Cancel the loan term extension request. This action can be carried out by the borrower or the lender.
- [Cancel Loan Interest Payment](https://developer.copper.co/api-reference/lending/cancel-loan-interest-payment.md): Cancel the loan interest payment request that is awaiting acceptance. This action can be carried out by the lender or the borrower.
- [Cancel Loan](https://developer.copper.co/api-reference/lending/cancel-loan.md): Cancel a loan that is awaiting acceptance. This action can be carried out by the lender or the borrower.
- [Cancel Loan Rebalance](https://developer.copper.co/api-reference/lending/cancel-loan-rebalance.md): Cancel the loan rebalance request that is awaiting acceptance. This action can be carried out by the lender or the borrower.
- [Cancel Loan Repayment](https://developer.copper.co/api-reference/lending/cancel-loan-repayment.md): Cancel the full or partial loan repayment. This action can be carried out by the borrower or the lender.
- [Cancel Loan Rerate](https://developer.copper.co/api-reference/lending/cancel-loan-rerate.md): Cancel the loan interest rerate request that is awaiting acceptance. This action can be carried out by the lender or the borrower.
- [Cancel Loan Top Up](https://developer.copper.co/api-reference/lending/cancel-loan-top-up.md): Cancel the loan top up request that is awaiting acceptance. This action can be carried out by the lender or the borrower.
- [Confirm External Disbursement](https://developer.copper.co/api-reference/lending/confirm-external-disbursement.md): Confirm the external disbursement of an off-platform managed loan. Only the lender can carry out this action.
- [Confirm External Interest Payment](https://developer.copper.co/api-reference/lending/confirm-external-interest-payment.md): Confirm the external payment of interest. Only the lender can carry out this action.
- [Confirm External Repayment](https://developer.copper.co/api-reference/lending/confirm-external-repayment.md): Confirm the external repayment of an off-platform managed loan. Only the lender can carry out this action.
- [Confirm External Top Up](https://developer.copper.co/api-reference/lending/confirm-external-top-up.md): Confirm the external top up of an off-platform managed loan. Only the lender can carry out this action.
- [Default Loan](https://developer.copper.co/api-reference/lending/default-loan.md): Default a loan that is in a defaultable state. This action can only be carried out by the lender.
- [Early Terminate Loan](https://developer.copper.co/api-reference/lending/early-terminate-loan.md): Early terminate ClearLoop loans within the same portfolio. This action can only be initiated by the Agency Desk.
- [Estimate Loan Leverage Ratio](https://developer.copper.co/api-reference/lending/estimate-loan-leverage-ratio.md): Obtain an estimated loan leverage ratio after taking into account requested loan amount and/or collateral amount adjustments.
- [Estimate Loan LTV](https://developer.copper.co/api-reference/lending/estimate-loan-ltv.md): Obtain an estimated loan LTV after taking into account requested loan amount and/or collateral amount adjustments.
- [Extend Loan Term](https://developer.copper.co/api-reference/lending/extend-loan-term.md): Request loan term extension. Loan term extension can only be requested within five days of the loan reaching maturity. This request can be initiated by either the borrower or the lender. The resulting request needs to be accepted by the counterparty.
- [Get Loan by ID](https://developer.copper.co/api-reference/lending/get-loan-by-id.md): Retrieve a loan by its ID
- [Pay Loan Interest](https://developer.copper.co/api-reference/lending/pay-loan-interest.md): Create an interest payment request.
- [Rebalance Loan](https://developer.copper.co/api-reference/lending/rebalance-loan.md): Create a loan rebalance request. This action can only be carried out by the borrower and must be accepted by the lender.
- [Reject Loan](https://developer.copper.co/api-reference/lending/reject-loan.md): Reject a loan. This action can only be carried out by the lender if a loan is in awaiting-approval state.
- [Repay Loan](https://developer.copper.co/api-reference/lending/repay-loan.md): Request the partial or full repayment of a loan. This request can be initiated by either the borrower or the lender. The resulting request needs to be accepted by the counterparty.
- [Rerate Loan](https://developer.copper.co/api-reference/lending/rerate-loan.md): Request a new loan interest rerate. The new interest rate must be stated in BPS. This action can only be carried out by the lender.
- [Secure Collateral Loan](https://developer.copper.co/api-reference/lending/secure-collateral-loan.md): Secure collateral for a loan. This action can only be carried out by the borrower and should be invoked for both initial and subsequent collateral top ups.
- [Top Up Loan](https://developer.copper.co/api-reference/lending/top-up-loan.md): Request a loan top up. This action can only be carried out by the lender and must be accepted by the borrower.
- [Get Portfolios](https://developer.copper.co/api-reference/portfolios/get-portfolios.md): Retrieve your portfolios (in UI terms - accounts)
- [Create Portfolio](https://developer.copper.co/api-reference/portfolios/create-portfolio.md): Create a new portfolio
- [Retrieve Portfolio by ID](https://developer.copper.co/api-reference/portfolios/retrieve-portfolio-by-id.md)
- [Archive Portfolio](https://developer.copper.co/api-reference/portfolios/archive-portfolio.md)
- [Create Lending Report](https://developer.copper.co/api-reference/reports/create-lending-report.md)
- [Create Orders NET Report](https://developer.copper.co/api-reference/reports/create-orders-net-report.md)
- [Create Stake Orders Report](https://developer.copper.co/api-reference/reports/create-stake-orders-report.md)
- [Create Stake Rewards Report](https://developer.copper.co/api-reference/reports/create-stake-rewards-report.md)
- [Create Position Statement Report](https://developer.copper.co/api-reference/reports/create-position-statement-report.md)
- [Create Balance Report](https://developer.copper.co/api-reference/reports/create-balance-report.md)
- [Get Active Stakes](https://developer.copper.co/api-reference/stake/get-active-stakes.md)
- [Get Outstanding Stakes](https://developer.copper.co/api-reference/stake/get-outstanding-stakes.md)
- [Get Pending Stakes](https://developer.copper.co/api-reference/stake/get-pending-stakes.md)
- [Get Wallets](https://developer.copper.co/api-reference/wallets/get-wallets.md): When you perform a request without specifying any additional filters like `portfolioId` or `currency`, the method returns all wallets which have non-zero balances only.
- [Create Wallet](https://developer.copper.co/api-reference/wallets/create-wallet.md): Create a new wallet
- [Get Wallet by ID](https://developer.copper.co/api-reference/wallets/get-wallet-by-id.md): Fetch wallet details
- [API updates](https://developer.copper.co/changelog/changelog.md): New features and improvements

## OpenAPI Specs

- [copper-open-api-public](/copper-open-api-public.json)
- [copper-postman-collection](/copper-postman-collection.json)
- [copper-unlimited-open-api](/copper-unlimited-open-api.json)
- [deprecated-api-open-api](/deprecated-api-open-api.json)
- [copper-open-api-create-order-chain-of-transfers](/extensions/copper-open-api-create-order-chain-of-transfers.json)
- [copper-open-api-create-order-create-network-settlement](/extensions/copper-open-api-create-order-create-network-settlement.json)
- [copper-open-api-create-order-create-network-transfer](/extensions/copper-open-api-create-order-create-network-transfer.json)
- [copper-open-api-create-order-delegate-or-undelegate](/extensions/copper-open-api-create-order-delegate-or-undelegate.json)
- [copper-open-api-create-order-generic-withdraw-order](/extensions/copper-open-api-create-order-generic-withdraw-order.json)
- [copper-open-api-create-order-move-funds-between-portfolios](/extensions/copper-open-api-create-order-move-funds-between-portfolios.json)
- [copper-open-api-create-order-move-funds-to-crypto-address](/extensions/copper-open-api-create-order-move-funds-to-crypto-address.json)
- [copper-open-api-create-order-multi-smart-call](/extensions/copper-open-api-create-order-multi-smart-call.json)
- [copper-open-api-create-order-smart-call](/extensions/copper-open-api-create-order-smart-call.json)
- [copper-open-api-create-order-staking-order](/extensions/copper-open-api-create-order-staking-order.json)
- [copper-open-api-get-orders-get-orders](/extensions/copper-open-api-get-orders-get-orders.json)
- [copper-open-api-get-orders-get-staking-rewards](/extensions/copper-open-api-get-orders-get-staking-rewards.json)
- [copper-open-api-get-orders-get-transfers](/extensions/copper-open-api-get-orders-get-transfers.json)
- [copper-open-api-hidden-hyperliquid](/extensions/hidden/copper-open-api-hidden-hyperliquid.json)
- [copper-open-api-hidden-trades](/extensions/hidden/copper-open-api-hidden-trades.json)
- [manifest](/manifest.yml)
- [package-lock](/package-lock.json)
- [package](/package.json)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.